隔離器與訊號轉換器｜系列選型指南

MG × YUYOU / PRODUCT & APPLICATION

隔離器與訊號轉換器｜系列選型指南

將現場感測訊號銜接至控制與監控系統。

MG 訊號轉換器可將感測器輸出轉換為適合 PLC、DCS 或 PC 系統處理的訊號。宇佑以輸入類型、輸出範圍、隔離需求與安裝方式為選型主軸，協助建立清楚的規格條件。

選型確認重點
輸入類型與量程｜輸出型式與負載｜隔離及供電｜安裝與設定方式

MG 產品分類 →　品牌與技術服務 →

產品資訊與文件下載

訊號變換器系列 Signal Conditioners Series

訊號變換器可將各種感測器輸出的現場訊號轉換為適合基於PLC、DCS或PC系統的標準訊號。他們也可用於幫助訊號增加負載驅動能力，隔離接地迴路訊號。
提供大於75000種製程訊號I/O、電源輸出及安裝配置組合供您選擇。另外，MG 原廠也是訊號變換器生產類型最多的廠商。

M-SYSTEM 具獨立通道與獨立隔離的隔離器&訊號轉換器
M2CA-5A-M2/N,M2D2-24-M2/N,M2D2-24-M2/N,M2FV-M2/CE,M2LCS-2A-M2,M2MS-A-M,M2REB-S-AA-M2/N,M2REB-S-AA-M2/N,M2RS-1A-M2/N,M2RS-3A-M/N,M2RS-3A-M/N,M2RS-4A-M,M2RS-4A-M,M2SES-1AA-M2/N,M2SES-1AA-M2/N,M2SN-2AA,M2SN-2AA/N,M2VF-AA-M2/N,M2VS-04-M/N,
M2VS-4A-M,M2VS-56-M/N,M2VS-65-M/N,M2VS-6A-M2/N,M2VS-AA-M,M2VS-AA-M/N,M2VS-AA-M/N,M2XF2-S1Z1-M2/N,M2XPA3-A14Z1-M2/N,M5MS-A-R/K,M5RS-4A-M,M5VF-A4-R,M5VS-04-R,M5VS-44-R,M5VS-4A-M,M8YV-66A-R,MD7DP-24,MD7RB-FF,MD7SF-24FF

MG產品指南_EN

MG產品指南_CHT

M5_W5_訊號轉換器_TW


歡迎您透過LINE直接詢問或報價：
LINE ID請搜尋 @yuyou
加入好友  

宇佑科技｜MG 選型與技術服務

從量測條件、型號比對到控制介面整合，宇佑協助釐清產品需求，並依專案範圍提供應用與導入支援。請提供完整型號、訊號規格及使用條件，讓我們更有效率地協助您。

電話：(02) 2222-7373
Email：sales@yuyou.com.tw

洽詢產品與技術服務 →宇佑官方 LINE →

產品功能、認證、軟體條件與供應狀態，依完整型號及原廠最新文件確認。

詳細資訊

MG × YUYOU / TECHNICAL GUIDE

隔離器與訊號轉換器｜系列選型指南｜技術資料

將現場感測訊號銜接至控制與監控系統。

MG 訊號轉換器可將感測器輸出轉換為適合 PLC、DCS 或 PC 系統處理的訊號。宇佑以輸入類型、輸出範圍、隔離需求與安裝方式為選型主軸，協助建立清楚的規格條件。

選型確認重點
輸入類型與量程｜輸出型式與負載｜隔離及供電｜安裝與設定方式

MG 產品分類 →　品牌與技術服務 →

系列選型導讀

系列主要選型方向評估重點
M1E顯示設定型小型轉換器通道配置與顯示需求
M2 / M2E小型插入式訊號轉換器輸入輸出種類、量程及設定方式
W2 / W5隔離雙輸出訊號分配雙輸出的用途及各自量程
M60 / M6薄型、省空間配置端子形式及盤內配置
M3可設定型訊號轉換器現場調整與設定方式
M80搭配專用底座的多通道配置通道數、底座及維護配置

此表提供系列選型方向；各型號功能與規格請參閱 MG 原廠訊號轉換器選型指南。

規格、圖面與參考資料

通用輸入
隔離器
DC mV，V，mA輸入
溫度輸入
電位器輸入
電流環路供電&電源供電
應變儀輸入
交流輸入
頻率I/O
氣動變換器
功能模組
隔離放大器
獨特&特別

M1E Series
Compact Plug-in with OEL display
M1E Series
CE
M1E Series are 2 or 4-channel Compact Signal Conditioners with OEL display.
  • 1500 Vac isolation
  • Standard DIN rail or surface mounting
  • 2 or 4 channels
  • Loop test
  • Selectable 100-240 Vac/24, 110 Vdc power input
    (M1Exx-2)
  • 24 Vdc power input (M1Exx-4)
  • Installation base (model: M1E-BS)

Read More
Products Line up		 Mini-M Series
Compact Plug-in
Mini-M Series
CE UL cUL
M2 / M2E Series Signal Conditioners are designed to accept a largest range of process signal inputs and provide a standard and non-standard DC output.
M2E Series are Compact Signal Conditioners with OEL display.
Read More
Products Line up
Mini-MW Series
Compact Plug-in Signal Splitters
Mini-MW Series
CE UL cUL
The W2 Series Signal Splitters provide two isolated outputs of independent ranges.
Read More
Products Line up		 M60S Series
Base-free Interconnecting Ultra-Slim
M60S Series
CE
M60S Series are 6-mm wide ultra-slim Signal Conditioners.
Spring clamp terminal connection for easy wiring.
Read More
Products Line up
M6 Series
Ultra-Slim
M6 Series
CE UL cUL
Ultra-slim, Space saving, Low power consumption.
High performance transmitters with wide selection of input and output ranges.
Read More
Products Line up M6S Series (Tension-Clamp)
Products Line up M6N Series (Screw terminal)
Products Line up M6D Series (Euro terminal)
M5-UNIT Series
Low Profile
M5-UNIT Series
CE
M5 Series Transmitters are designed to accept a wide variety of process signal input and provide a standard and non-standard DC output.
Read More
Products Line up
W5-UNIT Series
Low Profile Signal Splitters
W5-UNIT Series
CE
W5 Series Dual Output Transmitters are designed to accept a wide variety of process signal input and provide a standard and non-standard DC output.
Read More
Products Line up		 M3L Series
Thin Profile
M3-UNIT Series

About "One-Step Cal"


CE UL cUL
PC Programmable; "ONE-STEP CAL" Programming Without Needing a PC is also available.
Read More
Products Line up
M3S Series
Thin Profile
M3S-UNIT Series
CE
Universal AC/DC power input models available.
Read More
Products Line up		 M80 Series
Super-mini Signal Conditioners
M80 Series
CE
Isolates between analog output channels of a PLC.
Read More
Products Line up
20 Series
Hybrid IC Isolation Amplifiers
20 Series
CE
Isolation amplifiers provide signal and power isolation for data acquisition components to protect them from noises present at remote devices.
Read More
Products Line up
 
Dual Output Super-mini Signal Conditioners
Pico-M Series
CE
Wide Variety of I/O Modules
  • Ultra-small size thanks to surface-mounted components with low heat generating design
  • 4-way isolation
  • Continuously selectable input ranges
  • 4-20 mA 2nd output available

Products Line up
Plug-in Front Configurable
MX-UNIT Series
CE
Field Configurable
  • Local LED display indicates input in engineering unit
  • The display helps programming with the front ITEM/DATA buttons.
  • 2000 Vac isolation

Products Line up

Plug-in
M-UNIT Series
CE UL cUL
Plug-in type
  • LCD display optional
  • 2000 Vac isolation

Products Line up
Plug-in Signal Splitters
W-UNIT Series
CE
Plug-in signal splitters
  • Two independent output ranges can be specified.
  • 2000 Vac isolation

Products Line up

Plug-in
K-UNIT Series
CE
Plug-in type
  • Low cost
  • Wide selection of power transducers

Products Line up
Space-saving Plug-in
F-UNIT Series
Space-saving type
  • Zero & span adjustments behind access door

Products Line up

Space-saving Plug-in
H-UNIT Series
Space-saving type
  • Pneumatic transducers available

Products Line up
Dual Output
10-RACK Series
One-input, two isolated outputs
  • Up to 16 units in 19-inch rack
  • Optional 40-pin connector for outputs
  • Direct interface to Various DCS via connector

Products Line up

DCS Front End
18-RACK Series
Connectors compatible to various DCS
  • Up to 16 units in 19-inch rack
  • Direct interface to Various DCS via connector
  • Dual outputs standard

Products Line up
Interposing Relays
38-RACK Series
Greatly simplifies designing, installation, wiring and testing of interposing relays.
  • Complete packaging for interposing relays
  • Plug to plug connection controller
  • I/O simulator function

Products Line up
 
The widest variety of signal conditioning options available to the end-user. From two-wire hockeypucks to AC and DC powered DIN rail instruments, these devices isolate and interface field sensors such as AC/DC volts, 4-20 mA, RTDs, thermocouples, frequency, potentiometer, etc. to PLC, DCS or PC-based systems. Additionally, M-System offers the broadest line of signal splitters available.
   
 
原廠資料
  Mini-M Series
Compact Signal Conditioners
Mini-MW Series Signal Splitters
原廠資料
PC Programmable

4-Wire, Two isolated outputs
 
  • Wide selection of I/O ranges
  • Fill-in-the-blank programming with PC based configurator (M2X)
  • Two independent ranges can be specified with signal splitters.
  • High-speed 180 microsec. type available
  • 2000 Vac isolation
  • Base socket included with modules

 
原廠資料
  M5 / B5 / W5 Series
Low Cost, Low Profile, Compact Modules
原廠資料
4-wire

2-wire

Two isolated outputs
 
  • Only 41 mm (1.6 in.) deep modules can be installed anywhere, even behind a panel cover.
  • 2000 Vac isolation
原廠資料
  M3L / M3S / B3 Series
Thin Profile Signal Conditioners
原廠資料
PC Programming & "One-Step Cal" Universal I/O
Super-Slim Isolator, Fixed Range & PC Programmable Type
Output Loop Powered, DIP Switch Configurable
  • Wide selection of I/O ranges
  • Wide supply voltage range
 
原廠資料
  M6 Series
Ultra-Slim Signal Conditioners
 
 
  • Selectable connection method - Euro terminal, Screw terminal or Tension-Clamp.
  • Output load resistance 550 Ω (at 4-20 mAdc)
  • Low power consumption
  • Front Power LED provided
  • The Installation Base holding eight modules supported by a common power supply
  • 2000 Vac isolation
 
原廠資料
  Input Loop Powered Isolators
 
 
  • No external power source required
  • One channel or two channels
 

M2XU CE / UL / cUL 原廠資料
PC Programmable Universal I/O
  • DC mV, V & mA, T/C, RTD and Pot input.
  • Output selectable within 0-20 mA and ±10 V.
  • 100-240 Vac or 24 Vdc powered
  • 100-point linearization
  • UL/cUL Class I, Div. 2 approval
  
M2XUM CE 原廠資料
PC Programmable Universal I/O with Modbus RTU
  • DC mV, V & mA, T/C, RTD and Pot input.
  • Output selectable within 0-20 mA and ±10 V.
  • RS-485/Modbus RTU, 38.4 kbps
  • 100-240 Vac or 24 Vdc powered
  • 100-point linearization
  
M2XV2 CE / UL / cUL 原廠資料
PC Programmable I/O
  • Input selectable within 0-50 mA and ±10 V.
  • Output selectable within 0-20 mA and ±10 V.
  • 100-240 Vac or 24 Vdc powered
  • UL/cUL Class I, Div. 2 approval
  
M2XF2 CE / UL / cUL 原廠資料
PC Programmable I/O, Linearized Output
  • Input selectable within 0-50 mA and ±10 V.
  • Output selectable within 0-20 mA and ±10 V.
  • 100-240 Vac or 24 Vdc powered
  • UL/cUL Class I, Div. 2 approval
原廠資料		  
M2VS CE / UL / cUL 原廠資料
Fixed Range
  • Specific input range within ±300 V; current input with a resistor.
  • 100-240 Vac or 24 Vdc powered
  • Fast response 25 msec. optional
  • UL/cUL Class I, Div. 2 approval
  
M2FV CE 原廠資料
36 I/O Combinations by DIP Switch Setting
  • Free I/O range combinations among 4-20 mA, 0-20 mA, 0-10 V, 2-10 V, 0-5 V and 1-5 V
  • Response time is also selectable with DIP switch between 0.5 sec. and 30 msec.
  • 100-240 Vac or 24 Vdc powered
  • Ideal for quick-relief spare parts
  
W2VS CE / UL / cUL 原廠資料
Fixed Range Signal Splitter
  • Specific input range within ±300 V; current input with a resistor.
  • Independent current/voltage output ranges can be specified.
  • 100-240 Vac or 24 Vdc powered
  • Fast response 25 msec. optional
  • UL/cUL Class I, Div. 2 approval
  
M2VF CE / UL / cUL 原廠資料
Fixed Range, Fast Response <180 microsec
  • Specific input range within ±300 V; current input with a resistor.
  • 100-240 Vac or 24 Vdc powered
  • Response time <180 microsec.
  • UL/cUL Class I, Div. 2 approval
  
M2VF2 CE / UL / cUL 原廠資料
Fixed Range, Fast Response <30 microsec.
  • Specific input range within ±300 V; current input with a resistor.
  • 100-240 Vac or 24 Vdc powered
  • Response time <30 microsec. (15 kHz, -3 dB)
  • UL/cUL Class I, Div. 2 approval
  
W2VF CE / UL / cUL 原廠資料
Fixed Range Signal Splitter, Fast Response
  • Specific input range within ±300 V; current input with a resistor.
  • Independent current/voltage output ranges can be specified.
  • 100-240 Vac or 24 Vdc powered.
  • Response time <180 microsec.
  • UL/cUL Class I, Div. 2 approval
  
M5VS CE 原廠資料
Fixed Range, Low Cost
  • Specific input range within ±300 V; current input with a resistor.
  • 100-240 Vac or 24 Vdc powered (CE for 24 Vdc type)
  • Fast response 25 msec. / <1 msec. optional
  
M5MV CE 原廠資料
Fixed Range, Low Cost, Narrow Span Input
  • Specific input range within ±100 mV; current input with a resistor.
  • 100-240 Vac or 24 Vdc powered (CE for 24 Vdc type)
  • Fast response 25 msec. optional
  
M5VF CE 原廠資料
Fixed Range, Low Cost, High Speed Response
  • Specific input range within ±30 V; current input with a resistor.
  • 100-240 Vac or 24 Vdc powered (CE for 24 Vdc type)
  • Fast response <150 microsec.
  
W5VS CE 原廠資料
Fixed Range Signal Splitter, Low Cost
  • Specific input range within ±300 V; current input with a resistor.
  • Independent output ranges selectable
  • 100-240 Vac or 24 Vdc powered (CE for 24 Vdc type)
  • Fast response 25 msec. optional
  
W5FV CE 原廠資料
DIP Switch Configurable Signal Splitter, Low Cost
  • Input range field-selectable among 11 options
  • Output range field-selectable among 7 options
  • Optional second output of independent range can be specified when ordering
  • 100-240 Vac or 24 Vdc powered (CE for 24 Vdc type)
  
M3LU CE / UL / cUL 原廠資料
PC Programming & "One-Step Cal" Universal I/O
  • DC mV, V & mA, T/C, RTD, Pot and resistance input
  • Output selectable within 0-20 mA and ±10 V
  • 100-240 Vac or 24 Vdc powered (UL/cUL for 24 Vdc type)
  • DIP switch or PC configuration
  • 128-point linearization (DC input) using the PC Configurator (1000 points for T/C, 500 points for RTD)
  
M3LV CE / UL / cUL 原廠資料
PC & "One-Step Cal" Programmable I/O
  • Input selectable within 0-20 mA and ±10 V.
  • Output selectable within 0-20 mA and ±10 V.
  • 10-32 Vdc powered
  • DIP switch or PC configuration
  • 101-point linearization using the PC Configurator
  
M3SXV CE 原廠資料
PC Programmable I/O, Super-Slim Type
  • Input selectable within 0-50 mA and ±10 V.
  • Output selectable within 0-20 mA and ±10 V.
  • 100-240 Vac / 24 Vdc universal power input
  
M3SVS CE 原廠資料
Fixed Range Isolator, Super-Slim Type
  • Specific input within ±300 V; current input with an internal resistor
  • 100-240 Vac / 24 Vdc universal power input
  • Fast response 25 msec. optional
  
M3SWVS CE 原廠資料
Fixed Range Signal Splitter, Super-Slim Type
  • Specific input within ±30 V; current input with an internal resistor
  • 100-240 Vac / 24 Vdc universal power input
  • Fast response 3.5 msec. optional
  
M3SYV CE 原廠資料
Fixed Range Isolator, Super-Slim Type, Low Cost
  • Input 4-20 mA, 0-20 mA, ±20 mA, 0-10 V, 0-5 V, 1-5 V, ±10 V, ±5 V
  • Output 4-20 mA, 0-20 mA, 0-10 V, 1-5 V, ±10 V
  • 24 Vdc powered
  
M6SXV (Tension-Clamp Type) CE 原廠資料
M6NXV (Screw Terminal Type) CE 原廠資料
M6DXV (Euro Terminal Type) CE 原廠資料
PC Programmable I/O, Ultra-Slim Type
  • Input selectable within 0-50 mA and ±10 V.
  • Output selectable within 0-20 mA and ±10 V.
  • 24 Vdc powered
  
M6SVS (Tension-Clamp Type) CE 原廠資料
M6NVS (Screw Terminal Type) CE 原廠資料
M6DVS (Euro Terminal Type) CE 原廠資料
Fixed Range, Ultra-Slim Type
  • Specific input within ±30 V; current input with an internal resistor.
  • 24 Vdc powered
  • Fast response 3.5 msec. optional with voltage output or 25 msec. optional with current output.
  
M6SWVS (Tension-Clamp Type) CE 原廠資料
M6NWVS (Screw Terminal Type) CE 原廠資料
M6DWVS (Euro Terminal Type) CE 原廠資料
Fixed Range Signal Splitter, Ultra-Slim Type
  • Specific input within ±30 V; current input with an internal resistor.
  • Independent current/voltage output ranges can be specified.
  • 24 Vdc powered
  • Fast response 3.5 msec. optional with voltage output.
  
M6SYV (Tension-Clamp Type) CE 原廠資料
M6NYV (Screw Terminal Type) CE 原廠資料
M6DYV (Euro Terminal Type) CE 原廠資料
Fixed Range Isolator, Ultra-Slim Type
  • Input/Output: 4-20 mA/4-20 mA, 4-20 mA/1-5 V, 1-5 V/4-20 mA, 1-5 V/1-5 V, ±10 V
  • 24 Vdc powered
  • Fast response 3.5 msec. optional with voltage output or 25 msec. optional with current output.
  
M2SN-1, M2SN-2 CE / UL 原廠資料
Input Loop Powered Isolator, Single Channel (M2SN-1)
Input Loop Powered Isolator, Dual Channel (M2SN-2)
  • Input 4-20 mA or 10-50 mA
  • Output 4-20 mA or 1-5 V
  • UL Class I, Div. 2 approval
  
B5SN CE 原廠資料
Input Loop Powered Isolator, Low cost
  • Input 4-20 mA
  • Output 4-20 mA
  
M6SSN (Tension-Clamp Type) CE 原廠資料
M6NSN (Screw Terminal Type) CE 原廠資料
M6DSN (Euro Terminal Type) CE 原廠資料
Input Loop Powered Isolator, Ultra-Slim Type,
Single Channel (M6xSN-1)
Input Loop Powered Isolator, Ultra-Slim Type,
Dual Channel (M6xSN-2)
  • Input 0-20 mA (4-20 mA)
  • Output 0-20 mA (4-20 mA)
  
B3FV CE / UL / cU

宇佑科技｜MG 選型與技術服務

從量測條件、型號比對到控制介面整合，宇佑協助釐清產品需求，並依專案範圍提供應用與導入支援。請提供完整型號、訊號規格及使用條件，讓我們更有效率地協助您。

電話：(02) 2222-7373
Email：sales@yuyou.com.tw

洽詢產品與技術服務 →宇佑官方 LINE →

產品功能、認證、軟體條件與供應狀態，依完整型號及原廠最新文件確認。

回上一頁
line